REALME C20 RMX3061 DEAD BOOT AFTER RESET / REFLASH WITH FLASHTOOL

how to reflash realme c20 rmx3061 with smartphone flashtool is my article on today's opportunity, because by chance I managed to overcome realme c20 completely dead after formatting pattern or password because I also entered the wrong address in the manual format when we tried resetting the password and pattern using flashtool too, and in the end Our Realme C20 device can't boot and only reads as MTK USB port

REALME C20 RMX3061 DEAD BOOT AFTER RESET / REFLASH WITH FLASHTOOL

for realme c20 firmware which is still in OFP firmware form, you can follow my method and article on this page How to Extract Firmware Oppo / Realme OFP To Scatter and for how to filter drivers using libusbwin32 you can see on this page How to Use Libusbwin32, when it's finished everything and the firmware has also become a scatter, now return to the full flashing process for realme c20 rmx3061 using flash tool

Firmware Realme C20 RMX3061

Mediatek SP Driver Installer

Smartphone Flash Tool All Version

1. first time, as usual, install mediatek sp driver, then also install the libusbwin32 until it's finished, after you've finished installing both, now use libusbwin32 to start filtering our realme c20 driver in this way (open the libusbwin32 interface, click next, then there are several device that is displayed on the libusbwin32 interface, after that you can turn off the realme c20 until it is completely off it feels vibrating, then press and hold both volume up + down buttons while we connect realme c20 to a laptop or pc and also focus on the libusbwin32 interface later there will be an MTK USB Port that you select and you install it until there is successfully after filter it properly, just close the libusbwin32

2. open the sp flashtool that you extracted before using 2x clicks or you can also run as administrator until the sp flashtool interface opens and no files are entered or are still empty like this

REALME C20 RMX3061 DEAD BOOT AFTER RESET / REFLASH WITH FLASHTOOL

3. after flashtool interface is open, now select Download Agent menu then you navigate it to the flashtool folder then take the file (No_Auth.bin), both select the Authentication File menu again, navigate it back to the flashtool folder then take the file (auth_sv5.auth) and the last thing enter is the Scatter File, just navigate it to the realme c20 Firmware folder with the Scatter type, the result will be like this later

REALME C20 RMX3061 DEAD BOOT AFTER RESET / REFLASH WITH FLASHTOOL

4. after have entered all the files and are already in the sp flashtool interface, this is the most important during the full flashing process for realme c20 rmx3061 (you can see in the checkmark section in the section (opporesever2) in that section remove the checklist and only just omit that part, don't remove the other parts, and this is very important because if you don't remove the checklist on the opporeserve2 on flashtool there will be an error sec mismatch status

REALME C20 RMX3061 DEAD BOOT AFTER RESET / REFLASH WITH FLASHTOOL

5. Now open the MTK Auth Rev4, then click the Bypass menu and now you can turn off the realme c20 first then press and hold both volume up and down buttons while connecting the realme c20  to a PC or laptop until the mtk auth is fully read and you note (how much COM is generated mct mtk auth) because we will adjust it in flashtool later, if it has been read and there is already a serial com, now return to flashtool then select tab options, select options again then select connection, when we First look, you are still on USB by default, you can simply change from USB to UART and adjust the port serial with the results from mct mtk auth, after that we can select the Download menu on Flashtool and it will run like this

REALME C20 RMX3061 DEAD BOOT AFTER RESET / REFLASH WITH FLASHTOOL

6. If you follow my instructions correctly and carefully from the beginning to the end of my writing, I'm sure you will also be able to re-flash the realme c20 rmx3061 smoothly, and just wait for it to finish flashing, it might only take less than 10 minutes the realme c20 flashing process is complete like this

REALME C20 RMX3061 DEAD BOOT AFTER RESET / REFLASH WITH FLASHTOOL

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel