VIVO V11 PD1813F 1803 DEAD BOOT REPAIR WITH FLASHTOOL

How to Flash Vivo V11 PD1813F Via Flashtool is my next post and today, I managed to overcome the vivo v11 mediatek with the bootloop condition / stuck the vivo logo only using flashtool, the way it works is still the same as usual using the mtk auth tool too, not for bootloop conditions only but it can also be for the condition of forgetting the pattern / pin / password and bypass frp on vivo v11 pd1813f and one more thing that we can use to downgrade the android version from android 10 or 11 to android 9 only

VIVO V11 PD1813F 1803 DEAD BOOT REPAIR WITH FLASHTOOL

Vivo V11 PD1813F (Vivo 1806) reads mtk usb port or fails to install twrp and root or also crashes the android system, we can use this method and tutorial, but before you do everything there is the most important thing that you must pay attention to first, which is to prepare one pieces of a laptop or computer device and some materials such as the following, related to how to re-flash Vivo V11 Mediatek PD1813F, I will not explain in detail here, because I have made a video tutorial for you to use carefully so that you can also successfully overcome the vivo v11 pd1813f stuck in the vivo logo only or it's stuck in the wrong format and here the video page How to Overcome Vivo V11 PD1813F Bootloop Via Flashtool

Firmware Vivo V11 PD1813F ( 1806 )

Mediatek SP Driver Installer

Smartphone Flash Tool All Versions

1. What we have to do first is how we can connect this Vivo V11 device to a PC and it reads as an MTK usb port driver, how you can just install the mtk auto driver installer then you must also be able to filter drivers with libusbwin32, for how you can explore the page This is because we have provided a mediatek driver filter method

2. open and then run the smartphone flash tool with run as administrator on your windows then to download the agent we leave it by default, we just need to enter the Vivo V11 flash firmware scatter file into the scatter loading section, for file authentication, we don't think there is a file that is missing. we have to enter, because we are here using the smartphone flash tool version v5.1952

VIVO V11 PD1813F 1803 DEAD BOOT REPAIR WITH FLASHTOOL

3. open and run mct mtk auth rev4, on the interface you simply select the Bypass menu, now turn off your vivo v11 device then press and hold both volume buttons simultaneously and immediately connect the device to the pc, wait until all the mtk usb port drivers are connected properly on our PC, if it's true we continue to the next step

4. when our vivo v11 device is properly connected to the mct mtk auth bypass tool interface with serial com, now we can close it and then we return to the smartphone flash tool and we select the option - option - connection tab there will be two connectivity options between usb and uart we just select UART and for serial com we adjust the com in mct mtk auth rev4 and finally we select the download only menu to start the progress of flashing the vivo v11 firmware dead boot

VIVO V11 PD1813F 1803 DEAD BOOT REPAIR WITH FLASHTOOL

5. if we look at the smartphone flash tool there is a dialog box with OK information, we just remove the device and now we can turn on the vivo v11 then just turn it on until there will be a vivo boot logo and up here you have managed to overcome the vivo v11 pd1813f dead boot / bootloop / stuck logo with mediatek flash tool

VIVO V11 PD1813F 1803 DEAD BOOT REPAIR WITH FLASHTOOL

that's how we can fix vivo v11 dead boot repair only with usb only / without auth and with a smartphone flash tool only, but if later after you setup but there is information on your account verification, maybe it's factory reset protection (frp) for the bypass method frp google account you can search for it on this page and the method will be the same using the smartphone flash tool, just bookmark this page to get article updates from us

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel